Mounting Kit

 
 

The Nexus anti vibration mounting kit is an easy to use all-in-one mounting kit to minimize vibration noise from CPU fans, case fans and hard disk drives. including 4 soft rubber feet for your case.

Rubber Fan Mounts: 12 Units rubber fan mounts for open chassis fan & 12 units rubber fan mounts for open and closed chassis fan.

  • Prevents resonance, absorbs vibrations that other wise would be transmitted from the fan into the computer case.
  • 12 units to be used on open chassis fans
  • 12 units to be used on open or closed chassis fans
  • 4 units to be used per fan, so sufficient rubber fan mounts for 3 fans

Rubber Grommets and Screws: 12 units rubber grommets with screws for hard disk drive mounting

  • Helps to reduce transmitted vibration noise from the hard disk drive, by isolating the mounted hard disk drive from the chassis
  • Suitable for both 3.5" and 2.5" hard disk drives
  • 4 units to be used per hard disk drive, so sufficient grommets and screws for 3 hard disk drives.

Rubber Feet: 4 units rubber feet with adhesive

  • Superb soft rubber feet to replace and hard plastic version
  • Prevents the transition of unwanted vibrations from the inside of a pc via the chassis into the desk or hard floor.
  • With pre-applied adhesive tape
  • Can also be used on printers, speakers etc.

20 Tie Raps: 20 units tie raps

  • Clear plastic tie raps
  • To tie up lose cables to prevent them from hitting fan blades and to prevent annoying noises caused by loose cables touching the case chassis
  • 9cm/3.54inch length
 
 
 

 
   
 
 

 
   
12 rubber fan mounts for closed chassis fans

12 rubber fan mounts for closed chassis fans. Prevents resonance, absorbs vibrations that otherwise would be transmitted from the fan into the computer case. To be used on closed chassis fans.

 

 
12 rubber fan mounts for open chassis fans

12 rubber fan mounts for open chassis fans. Prevents resonance, absorbs vibrations that otherwise would be transmitted from the fan into the computer case. To be used on open chassis fans.

 
 
   
 
12 rubber grommets with screws for HDD's

12 rubber grommets with screws for hard disk drive mounting. Helps to reduce transmitted vibration noise from the hard disk drive, by isolating the mounted hard disk drive from the case chasis. Can be used on several other componets too!

 
   
4 units rubber feet with adhesive

4 units rubber feet. Superb soft rubber feet to replace any hard plastic version. Prevents the transition of unwanted vibrations from inside a pc via the chasis into the desk or hard floor. Can also be used on printers, speakers etc.

 
 
   
 
20 units Tie Raps

 

20 units of usefull 9cm/3.54inch clear plastic tie raps are also included in your Nexus Anti-Vibration Mounting Kit

 
   
Data Sheet

Click to Download

 
 
   
 
Reviews

  

 
   
High Resolution Pictures

 

        

 
 
 

HOME  |  ABOUT & CONTACT  |  CASE FANS  |  COOLERS  |  POWER SUPPLIES  |  ACCESSORIES  |  WHERE TO BUY

2000-2008 Nexus Technology BV. All Rights Reserved. Nexus is a registered trademark in Europe and other countries.